PRODUCT MANUAL
CONTENTS

1. Installation
2. Product Specifications
3. Use & Safety
4. Care & Maintenance
5. Warranty & Contact

1. INSTALLATION OF BASE

Delivery inspection
1 Always check that the display cabinet is delivered on a pallet.
2 If the display cabinet is not delivered on a pallet upon receipt, Aakjaer Furniture must be contacted immediately, before any further handling or unpacking takes place.
3 Contact: info@aakjaerfurniture.com and attach a photo documenting the missing pallet.
4 The following parts are packed inside the cabinet:
◦ Glass shelves
◦ Base (leg plinth)
◦ A box containing screws, shelf brackets, handles and power supply for the lighting

Installation of the base (leg plinth)
• Carefully remove all parts from inside the display cabinet.
• Unpack the base and place it in the intended final position of the cabinet.
Installation of the display cabinet on the base
• The display cabinet must be lifted by a minimum of two people.
• Place the cabinet on top of the base.
• The cabinet must align correctly using the wooden guide blocks mounted on the underside of the cabinet.
• The cabinet must not be tilted into position.
• Secure the base to the cabinet using the 2 supplied screws.
See video for correct installation ⚠️
Important:
This installation method is the correct and approved method for installing the display cabinet.
If the base is installed while the display cabinet is lying down, and the cabinet is subsequently lifted into an upright position, the warranty is NOT valid, as this method may cause damage to the legs and the cabinet construction.

Final installation
Once the display cabinet is correctly mounted on the base, the following components may be installed:
• Lighting
• Handles
• Glass shelves

⚠️ General handling and relocation of the display cabinet
Angulus Vitrine has a distinctive design and construction that requires correct handling.
The display cabinet must NEVER be tilted, pushed or pulled across the floor.
During any relocation, the cabinet must always be lifted and carried by a minimum of two people.
Any damage caused by pushing, pulling or incorrect handling is not covered by warranty.


2. PRODUCT SPECIFICATIONS

Materials
• Solid FSC-certified oak slats and legs
• Premium FSC-certified 1.5 mm oak veneer with MDF core

Surface Treatment
• Guardian Oil

Maximum Load
• Glass shelf: 5 kg

Intended Use
• For indoor use only

3. USE & SAFETY

⚠️ Important Safety Instructions
• Do not use the cabinet as a standing surface.
• Keep all packaging materials away from children.
• Ensure stable placement on an even surface. If the doors appear misaligned, place small felt pads under the legs to adjust and align the doors.
• Avoid direct sunlight and heat sources, as these may cause the wood to shift or warp.
• When moving the cabinet, always lift it—do not drag or push it across the floor.
• The cabinet must not be stored or transported lying on its side.
• Remove all glass shelves before moving the cabinet.

4. CARE & MAINTENANCE

🔧 Daily Care
• Clean the cabinet regularly with a soft, dry, lint-free cloth.
• Wipe off any spills or liquids immediately from wooden surfaces to prevent stains.
• Clean glass shelves and doors with warm water and a well-wrung cloth. Soap or glass cleaner is not recommended.
• Re-oiling is recommended once a year, depending on placement and humidity. We recommend the following Guardian products:
• Natural Oiled Oak: Guardian Wood Oil
• White Oiled Oak: Guardian White-Pigmented Wood Oil
• Smoked Oak: Guardian Mocha-Pigmented Wood Oil

❌ Avoid
• Solvents
• Corrosive cleaning agents
• Steam cleaning
• Hard brushes
• Sharp objects

5. WARRANTY & CONTACT
• 2-year factory warranty when handled and maintained correctly
• Inspection period: 5 days for reporting hidden damages

📞 Customer Service
• Email: nanna@aakjaerfurniture.com
• Website: www.aakjaerfurniture.com